Data and Commands

Once a device is connected, there are two things to verify: can you read its values, and can you push commands to it? This page covers both. First you'll use real curl calls to read a point's latest value and history, then issue a write command and poll for its result. The last section covers what happens at the edges: offline devices, read-only points, and failed writes.

You are here: you've already connected your first device and values are flowing into storage. By the end of this page you'll be able to query values, issue commands, and tell whether a command truly succeeded — on your own.

Two opposite pipelines

Data and commands run in opposite directions, but on your side both are just HTTP calls through the Gateway (dc3-gateway, 8000).

The data flow goes device → you. The driver packages each acquisition into a PointValue, sends it through RabbitMQ's dc3.e.value exchange to the Data Center (dc3-center-data), and stores it in TimescaleDB's dc3_point_value hypertable. You read the latest value through /api/v3/data/point_value/latest and the historical range through /api/v3/data/point_value/list. This is a query over facts that have already happened — no side effects, safe to retry.

The command flow goes you → device. You POST a read or write command to the Data Center, which records it in dc3_point_command_history (status PENDING), then routes it through the dc3.e.point_command exchange to the target driver. After the driver runs it against the device, the result comes back through dc3.e.point_command_result. The command interface returns a commandId immediately — actual success or failure is determined by polling with that ID. This is an asynchronous write path with side effects.

For the field-level details, model transformations, and RabbitMQ topology of each pipeline, see Data Plane and Command Plane. This page only covers how to use them.

Reading data: latest values and history

The Data Center exposes two read interfaces. Both are POST (the body carries pagination and filter conditions) and each returns Page<PointValueVO>. Every value carries deviceId, pointId, rawValue (raw value), calValue (engineering value), numValue (numeric projection, nullable), plus createTime and operateTime. Both are tenant-isolated (tenantId) and sit under the permission code point_value:list. Protected interfaces require the auth headers X-Auth-Tenant, X-Auth-Login, and X-Auth-Token — see the API documentation for how to obtain them.

/api/v3/data/point_value/latest returns the current value of each point. deviceId and pointId are optional — supplying only deviceId returns the latest values of all points on that device. Pagination fields nest inside the page object:

latest valuelist historical range

bash

# Example deviceId / pointId — replace with your own
curl -X POST http://localhost:8000/api/v3/data/point_value/latest \
  -H 'Content-Type: application/json' \
  -H 'X-Auth-Tenant: <tenant>' -H 'X-Auth-Login: <account>' -H 'X-Auth-Token: <token>' \
  -d '{"deviceId": 1001, "page": {"current": 1, "size": 20}}'

bash

# Use rangeKey (today/24h/7d/30d) or createTimeFrom / rangeHours to bound the time window
curl -X POST http://localhost:8000/api/v3/data/point_value/list \
  -H 'Content-Type: application/json' \
  -H 'X-Auth-Tenant: <tenant>' -H 'X-Auth-Login: <account>' -H 'X-Auth-Token: <token>' \
  -d '{"deviceId": 1001, "pointId": 2001,
       "rangeKey": "24h",
       "page": {"current": 1, "size": 100}}'

Compared to latest, /api/v3/data/point_value/list adds time-filter fields such as createTimeFrom, rangeHours, and rangeKey (today/24h/7d/30d) for paging through history. The response looks roughly like this (sample values):

json

{
  "data": {
    "current": 1, "size": 20, "total": 1,
    "records": [
      { "deviceId": 1001, "pointId": 2001, "rawValue": "26.5", "calValue": "26.5",
        "numValue": 26.5, "createTime": "2026-06-22T11:59:58" }
    ]
  }
}

num_value may be null in aggregations

The underlying dc3_point_value.num_value is NULL for non-numeric or JSON payloads. If you bypass the API and run aggregations like AVG/SUM directly on the hypertable, you must add num_value IS NOT NULL, or the results will be skewed. A point's raw and calculated values live in raw_value and cal_value respectively (both are text).

Issuing commands: read, write, and polling for results

The command interfaces live in the Data Center, under the permission code point_command:list. They don't return the execution result — only a command ID. Execution is asynchronous; you take that ID and poll the history.

POST /api/v3/data/point_command/read triggers a single read on demand, bypassing the acquisition cycle to request the value from the device right now. POST /api/v3/data/point_command/write writes a value to a writable point. Both accept an optional commandId for idempotent deduplication.

write commandread commandpoll for result

bash

curl -X POST http://localhost:8000/api/v3/data/point_command/write \
  -H 'Content-Type: application/json' \
  -H 'X-Auth-Tenant: <tenant>' -H 'X-Auth-Login: <account>' -H 'X-Auth-Token: <token>' \
  -d '{"deviceId": 1001, "pointId": 2001, "value": "100"}'
# The data field of the response body is the commandId (example): "a1b2c3d4-...."

bash

curl -X POST http://localhost:8000/api/v3/data/point_command/read \
  -H 'Content-Type: application/json' \
  -H 'X-Auth-Tenant: <tenant>' -H 'X-Auth-Login: <account>' -H 'X-Auth-Token: <token>' \
  -d '{"deviceId": 1001, "pointId": 2001}'

bash

# commandId is the command ID obtained in the previous step
curl 'http://localhost:8000/api/v3/data/point_command_history/get_by_command_id?commandId=a1b2c3d4-....' \
  -H 'X-Auth-Tenant: <tenant>' -H 'X-Auth-Login: <account>' -H 'X-Auth-Token: <token>'

Polling returns a PointCommandHistoryVO. Its key fields are status (execution status, PointCommandStatusEnum), responseValue (result / read-back value), requestValue, finishTime, and expireTime. Status starts at PENDING and moves forward from there — it's only truly done when you see SUCCESS:

json

{
  "data": {
    "commandId": "a1b2c3d4-....",
    "deviceId": 1001,
    "status": "SUCCESS",
    "responseValue": "100",
    "finishTime": "2026-06-22T12:00:01"
  }
}

Commands have a default 10-second time-to-live

The command DTO's expireAt defaults to time of dispatch + 10s. If the device isn't reached before then, the driver — upon consuming the command and finding now > expireAt — marks it EXPIRED instead of waiting indefinitely. If polling stays at PENDING/SENT for a long time, suspect the driver or an offline device first.

Command state machine: where does it go after PENDING

A command's lifetime advances one cell at a time through dc3_point_command_history.status. PENDING means it's just been persisted and is waiting to be published; once the RabbitMQ publisher-confirm returns, it moves to SENT (queued, waiting for the driver). From there the driver's execution receipt decides the terminal state. Understand this diagram and you can work backwards from any status to see which hop it's stuck on.

There are six terminal states, matching values 2–7 of PointCommandStatusEnum: SUCCESS(2) succeeded; FAILED(3) the driver explicitly failed; TIMEOUT(4) the application layer never received a receipt; EXPIRED(5) consumed only after expireAt had passed; DUPLICATE(7) blocked by the driver's dedup cache; DEAD(6) rejected into the dead-letter queue and no longer processed. PENDING(0) and SENT(1) are transitional.

TIMEOUT currently has no producer

TIMEOUT(4) is reserved in PointCommandStatusEnum, but no code in the current pipeline sets a command to this status; SUCCESS/FAILED/EXPIRED/DUPLICATE/DEAD are the terminal states actually produced. Read the TIMEOUT transition in the state-machine diagram with that in mind.

Edge cases: offline, read-only points, and failed writes

Before dispatching a command, the system validates in this order: tenant consistency → device/point enabled → rwFlag check (for write commands) → driver online. If any check fails, the command is never dispatched. Three common "the command didn't go through" causes are worth keeping distinct:

When the device or driver is offline, the command can still be submitted and you'll get a commandId, but nothing consumes it — so it usually sits at SENT until EXPIRED, or becomes TIMEOUT after a timeout. Whether a device is online is determined by the lease in dc3_entity_state plus the RabbitMQ heartbeat; you don't set it by hand.

A point's read/write capability is set by its rwFlag, which takes the values READ_ONLY, WRITE_ONLY, and READ_WRITE. A write command to a read-only point is rejected outright at the validation stage.

Writes to read-only points are rejected; failed writes echo no value

Calling /point_command/write on a point with rwFlag=READ_ONLY is rejected — this is a design constraint, not a temporary check. A write command is recorded as SUCCESS only when the driver's write() explicitly returns success. On failure the status is FAILED and responseValue=null — a failed write echoes no value at all, so nothing makes it look like it succeeded. When you poll and see FAILED, don't treat responseValue as the value that was written.

Custom commands are a separate mechanism

This page covers point-level read/write commands (dc3.e.point_command / PointCommandDTO). Device-level "custom commands" use the separate dc3.e.command / CommandCallDTO namespace — don't mix the exchanges or DTOs of the two.

Troubleshooting checklist

Find issues quickly by symptom. The table is a quick reference; root-cause explanations are in the text above and in the two plane documents.

Symptom	Check first
Devices exist but `/point_value/latest` returns empty	Whether tenant/`deviceId`/`pointId` are correct, the acquisition cycle, driver protocol logs, whether RabbitMQ is backed up
Historical values have gaps or lag	Batch thresholds (`POINT_BATCH_SPEED`/`POINT_BATCH_INTERVAL`), RabbitMQ backlog, Data Center logs
Command stuck at `PENDING`/`SENT` for a long time	Whether the target driver is online, whether it listens on `dc3.q.point_command.{serviceName}`
Command becomes `EXPIRED`	Device/driver offline or slow to respond; the 10-second `expireAt` has elapsed
Write command returns `FAILED`	Whether the point's `rwFlag` allows writes, the written value's type/range, the protocol return code

Data and Commands ​

Two opposite pipelines ​

Reading data: latest values and history ​

Issuing commands: read, write, and polling for results ​

Command state machine: where does it go after PENDING ​

Edge cases: offline, read-only points, and failed writes ​

Troubleshooting checklist ​

Further reading ​

Data and Commands

Two opposite pipelines

Reading data: latest values and history

Issuing commands: read, write, and polling for results

Command state machine: where does it go after PENDING

Edge cases: offline, read-only points, and failed writes

Troubleshooting checklist

Further reading